(1) Adhesive strength peeling testing machine
*** 접착 강도 벗김 테스트 머신 ***
Model : HD-B609B-S
Universal Test Machine - Peel Clamp (50kg) included
Panasonic Servo Motor Type Germany Brand TECSIS Load Cell – S
1. Clamps : 180&90 Degree Peel Clamp (50kg)
2. Calibration Certificate
3. Calibration Device
GENERL SPECIFICATIONS
1. Estimated Packaging Dimensions: (W*D*H) about 640*650*1470mm
2. Power supply source: single-phase, 220V±10%, 50/60Hz (can be appointed)
3. Estimated Gross Weight: about 120kg
STANDARD FEATURES
Item | Description |
Max. Force | 50 kg |
Load cell | Germany brand load cell for high accuracy |
Control system | LCD / PC with windows 7 system |
Motor | Panasonic servo motor w/AC variable speed drive system, high-precision mechanical ball screw rod |
Force reading | kgf, Ibf, N, KN, T etc |
Stoke | 900mm including fixture |
Load cell Resolution | 1/250,000 |
Load Precision | ≤0.5% |
Test speed | 0.1~500mm/min (adjustable) |
Software | TM 2101 |
Curves display | Load- elongation, Elongation-time, Time-elongation, Stress-strain |
Data display | Max. force, speed, sample information, strength(Kpa, Mpa, N/mm, N/mm2) etc… |
Safety features | E-Stop Over-load protection Upper and lower limit switches Load sensor with automatic retreat |
APPLICATIONS
(2) Electric adhenvie tape roller test equipment
Electric Rolling Tape Adhesion machine은
일정한 압력과 속도로 접착 테이프를 표준 강판에 부착하여 박리 시험 및 유지 시험을 위한 장비.
Model : HD-C526-1 Model : HD-C526-3
Specifications :
load |
2 Kg |
Roller Dimension |
84mm×45mm |
Rubber Hardness |
Hs 80 ± 5 |
Rubber Thickness |
6 mm |
Roller Speed |
300 mm/min |
Outside Dimension (L×W×H) |
540×440×230 mm |
Weight |
28Kg |
Power |
1#, AC220V, 50/60Hz, 2A |
Design Criteria |
CNS-11888; PCTS |
(3) Room temperature tape holding time tester
상온 테이프 유지 시간 테스터기는 유지 시간을 기록하여 필요한 특성 및 하중 하에서
테이프 글라이드 거리를 기록함으로써 유지 특성을 평가하기 위해
테이프 부착에 대한 정적 하중 시험을 수행하는 데 사용.
Thickness of the sample |
0~2.0 mm |
Width |
40~50 mm |
Length |
60~125 mm |
Roller |
2 000 g±50 g |
Load panel+ weight+ connect rod |
1000g±10g |
Sample size |
25mm×100mm |
Counter |
10 sets, 99999.9 hours |
Steel testing panel |
10 pieces |
Steel loading panel |
10 pieces |
Outer material: advanced coating + aluminum alloy
Testing steel panel; 0Cr18Ni9 or Cr18Ni9Ti
Loading steel panel;Cr18Ni9 or 1Cr18Ni9Ti
Weight;stainless steel
Rubber layer of roller; hardness of the rubber is 80°±5°, thickness is6 mm
Installation of accessory; instruction one set, roller one set, weight 5 set, steel testing panel/loading panel each 5 pieces
(4) JIS Z0237 Initial Adhesion Ball Tape Testing Machine
Main Technical Parameters:
Angle |
0°~40°adjustable |
Testing angle |
20°,30°,40° |
Ball size |
Diameter 1/32”-1” in wooden box |
Leaning panel |
5mm thickness glass |
Primary runway |
(L)100mm |
Dimension |
(L×W×H) 380*150*250 mm |
Weight |
8Kg |